1. Grinding application software: the grinding software independently developed by our company can set grinding parameters such as tool Angle, arc size and feed speed. After the tool center is set, the grinding software can set the basic parameters, the machine can automatically grind out a high-precision tool. All the parameters of the machine are managed by the database system, through the processing program name call, convenient procedures to store and find. The software can display the tool image and the coordinates of the CNC axis and can generate calibration lines to show the center position of the rotation axis. At the same time, the software is responsible for the communication between the interface and the CNC system. The grinding wheel parameters, tool parameters and processing parameters (such as feed, feed speed and residence time) of the software interface can be comprehensively generated into the numerical control code (G code) and transmitted to the numerical control system so that the machine can finish grinding automatically. The software has four cycles for any combination: 1) middle edge grinding, 2) right edge grinding, 3) left edge grinding, and 4) all grinding. Can respond to all customer requirements and minimize grinding air time.
2. Automatic dressing of the grinding wheel: the automatic dressing device of the grinding wheel is installed on the working feed shaft (Y-axis). Driven by the servo motor, the diamond grinding wheel is automatically dressed and cleaned.
Online measuring device: the device is installed on the bracket of pneumatic folding contact measurement, to avoid interference with the work of the grinding wheel. The need to measure, by the driving of the NC program to measure after grinding tool, the actual measured value and the value of the difference between the grinding wheel wear, can automatically compensate to the thickness of the grinding wheel.
