1.The spindle of grinding wheel
The diameter of the grinding wheel is 150mm
Center hole of grinding wheel 40mm
Power of grinding shaft is 3 kilowatts
The effective grinding speed is adjustable from 1000 ~ 4000 RPM
Servo motor swing, adjustable swing frequency 0 ~ 60 times/min
Grinding wheel movement range (X direction) 350mm
The Angle of the sand wheel shaft in the vertical plane can be arbitrarily adjusted in the control rice.– 5 ° and 25 °
2.Tool head frame
The range of motion in the feed direction (Y direction) of the table is less than 90 mm
The axial rotation range of the workpiece is 360 degrees
The rotation range of the workpiece in the horizontal plane is 360 degrees
Straight spool display resolution 0.001 mm
12 rotation axis display resolution 1 ‘
Cooling and optical amplification system
Optical microscopic magnification of 0.7 to 4 times
The maximum magnification of the CCD system is about 80 times
Size and weight
The cooling tank capacity with a filter paper is about 70L
The total size of 16 without an integrated cooling system 1890×1650×1980 mm
The total weight of the cooling tank is 2400 kg
The power supply
The main power supply is 12 kW
The power supply voltage 380 v/three-phase /50Hz
The system of Demina BT-150D CNC PCD tool grinder can automatically detect and compensate the wear and maintain the dimensional accuracy of grinding PCD tools.
